Why a routine matters
Most greenhouse failures start small: a loose clip, a tear, a seized vent. Left alone, wind and weather make them worse. A simple seasonal check catches them early.
Covers and cladding
- Look for tears, holes, abrasion points and loose fixings, especially where film meets framework.
- Check for brittleness, discolouration or chalking that signals UV breakdown.
- Repair small holes immediately with a suitable repair tape.
- Clean the cover to maintain light transmission.
- Check for water pooling or sagging in the film.
Frame and fixings
- Check base rails, brackets and ground fixings for movement or corrosion.
- Tighten bolts and replace damaged fasteners.
- Look for bent or damaged hoops, posts or bracing.
- Check gutters and downpipes are clear and secure.
Vents and drives
- Operate every vent fully open and shut. Watch for binding or uneven movement.
- Lubricate moving parts according to manufacturer recommendations.
- Test automatic controllers and sensors.
- Check insect screens for damage and blockage.
Doors, end walls and seals
- Check hinges, latches, rollers and seals.
- Look for draughts and gaps that let weather in.
- Make sure end-wall cladding is secure.
After storms
- Inspect for cover damage, loose fixings and movement as soon as it’s safe.
- Clear fallen branches and debris.
- Don’t delay repairs. The next wind will find the same weak spot.
When to call for help
If you find structural damage, repeated tears, failing vent drives or a cover that’s clearly at end of life, talk to us. We can inspect, repair or re-cover before small problems become big ones.



